Aerospace Testing Equipment: Reliable Solutions for Precision and Safety from CME
In the aerospace industry, precision, reliability, and safety are non‑negotiable core requirements. Every component, from avionics to structural parts, must perform flawlessly under extreme environmental conditions. As a professional provider of mechanical testing equipment, CME is committed to delivering high‑quality aerospace testing equipment, covering KRD14&15 series Shock Response Spectrum Test System, KRD30&31 series constant acceleration tester, and Mass and Center of Gravity Test solutions. Our products strictly adhere to industry standards and practical application needs, providing solid technical support for the reliability and safety verification of aerospace components.
KRD14&15 series Shock Response Spectrum Test System: High‑Performance Shock Response Spectrum Testing Equipment
KRD14&15 series Shock Response Spectrum Test System are core products of CME for aerospace shock testing, designed to simulate extreme shock environments encountered by aerospace components during launch, flight, and landing. These systems adopt advanced technical principles to ensure accurate and reliable test results, providing critical data support for evaluating the shock resistance and structural integrity of products.
Compliant MIL‑STD Standards
MIL‑STD‑810 Method 517.3 Shock Testing Standard
MIL‑STD‑883 Method 1011.9 Shock Testing Standard
MIL‑STD‑202 Test Method 213
MIL‑STD‑750 Method 2016.2
The KRD15 series, as a state‑of‑the‑art shock response spectrum tester, uses compressed gas energy to provide impact energy, pushing the shock hammer to impact the resonance plate and generate high‑energy shock. Compared with traditional pendulum shock response spectrum testers, it has the advantages of high energy, stable performance, high reliability, good repeatability, easy adjustment, safety, and environmental protection, making it widely applicable to aerospace, aviation, and marine industries. Its response frequency range covers 10–10,000 Hz, with a maximum response acceleration up to 15,000 g. The rigidity of the resonance plate mounting area is greatly enhanced to ensure stable fixation during testing. Multiple table sizes (500×500 mm to 1200×1200 mm) are available to meet testing requirements for aerospace components of various specifications.
The KRD14 series pneumatic shock response spectrum tester is mainly used to measure and determine the shock resistance of electrical and electronic products or packaging, and to evaluate the reliability and structural integrity of test products in shock environments. It is fully compatible with the testing needs of aerospace electronic components, providing accurate and repeatable test data to ensure components can withstand the impacts of complex aerospace environments.
KRD30&31 series constant acceleration tester: High‑Precision Constant Acceleration Testing Equipment
KRD30&31 series constant acceleration tester are specially designed for aerospace component testing, used to determine whether electronic components, small equipment, and other electrical and electronic products can maintain good structural adaptability and performance under constant acceleration (excluding gravity), such as forces generated during operation of aircraft, rotating machinery, and projectiles, and to evaluate the structural integrity of certain components.
Compliant MIL‑STD Standards
MIL‑STD‑810 Method 513.8 Constant Acceleration Testing Standard
MIL‑STD‑883 Method 2001.2 Constant Acceleration Testing Standard
MIL‑STD‑202 Test Method 212
MIL‑STD‑750 Method 2006 Constant Acceleration
IEC 60068-2-7 Test Ga Constant Acceleration
The KRD30 series (Box Type) adopts a fully automatic computer remote real‑time control interface. Operators only need to input simple parameters to start the equipment and complete acceleration tests accurately. The user‑friendly display interface shows real‑time test curves, tolerances, and test time, and is equipped with a powerful multi‑acceleration continuous test system that supports multi‑level acceleration testing according to different sample requirements. The series also provides reliable protection including open circuit, over‑limit, and over‑speed protection, supporting both automatic and manual control modes to ensure safe and stable testing. Test reports can be automatically generated and printed after testing to improve efficiency. The KRD30 series covers multiple models with maximum load ranging from 3×6 kg to 0.02×N kg, acceleration range 1–80,000 g, and acceleration accuracy≤3%, meeting testing needs for various aerospace components. It complies with the above international standards to ensure authoritative and comparable test results.
The KRD31 series (Arm Type) inherits the reliable performance of the KRD series, focusing on constant acceleration environment simulation for aerospace components. It accurately simulates the constant acceleration forces encountered during flight, effectively evaluating structural stability and performance reliability, providing important technical support for the design and optimization of aerospace products.
Mass and Center of Gravity Test: Precision Measurement for Aerospace Component Performance
Mass and center of gravity are critical parameters affecting flight stability and control accuracy of aircraft, UAVs, satellites, and other aerospace products. CME provides professional mass and center of gravity test equipment and solutions that accurately measure mass and centroid position of aerospace components, and can be extended to moment of inertia measurement, providing comprehensive data support for product design, performance optimization, and quality control.
CME’s mass and center of gravity test equipment combines high-precision load cells and precision mechanical structures, using multi-sensor collaborative measurement to quickly obtain object mass data. It analyzes force distribution under different attitudes through lever principle and inertia measurement technology to accurately calculate centroid coordinates. The equipment features an automated detection process and can quickly generate test reports, widely used in the aerospace field.
For different types of aerospace components, CME provides customized mass and center of gravity test solutions. For example, the satellite momentum wheel mass & centroid & moment of inertia measurement platform has a mass range of 2 kg–10 kg, mass accuracy<±0.08%, centroid accuracy<±0.1 mm, accurately measuring the axial centroid of the momentum wheel and X/Y/Z centroid of the junction box. The micro UAV mass & centroid measurement platform can measure 3-axis (X/Y/Z) centroid position and 3-axis moment of inertia, with mass range 500 g–25 kg and centroid accuracy≤±1 mm–±2 mm. All parts above the table are stainless steel to prevent rust, and the internal measurement unit is damped to meet road transportation requirements, convenient for on-site testing and long-distance transport.
CME: Your Trusted Partner for Aerospace Testing Equipment
CME has long been engaged in R&D and manufacturing of mechanical testing equipment, focusing on the aerospace testing sector. Our product portfolio covers shock response spectrum testing, constant acceleration testing, mass and center of gravity testing, and other core areas. Our equipment strictly follows international and industry standards, featuring high precision, stable performance, and easy operation, and is widely recognized by customers in the aerospace industry